EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is usually a really efficient photo voltaic controller created for off-grid photo voltaic units. Depending on multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and program balance for an array of photovoltaic (PV) apps.
Essential Capabilities of your EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller technological innovation for remarkable photo voltaic energy harvesting. Important attributes consist of:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display screen with serious-time details checking.
Various Load Regulate Modes which include guide and timer.
In depth Digital Protections versus overcharging, about-discharging, small circuits, and reverse polarity.
Action-by-Action Tutorial to Putting together the EPEVER Tracer AN Collection Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specifications.
2. Mounting the Demand Controller
Pick out a properly-ventilated, dry area close to the battery financial institution.
Safe the Tracer AN controller using the presented mounting brackets.
Maintain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Constantly comply with appropriate security protocols and make sure the process is driven off just before connecting components.
Move one: Connect the battery terminals to the demand controller (favourable to positive, destructive to adverse).
Stage two: Hook up the solar panel array to the PV enter terminals.
Stage 3: Hook up the load terminals if utilizing a direct load relationship.
Phase 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Energy over the controller by connecting the battery initially.
Make use of the LCD Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Guide, timer, gentle Handle.
five. More info Checking and Information Logging
The Tracer AN Series supports true-time monitoring utilizing the MT50 remote meter.
Data is often logged by way of the RS485 interaction port employing computer software such as Photo voltaic Station PC.
Distant monitoring can be done Along with the EPEVER WiFi module.
6. Troubleshooting Popular Concerns
Issue one: No Energy Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Alter method parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Lowered energy losses through conversion.
Enhanced Dependability: Secure efficiency underneath variable loads.
Longer Battery Lifetime: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological innovation is definitely an Fantastic choice for optimizing solar power era and increasing battery lifetime. By following the above set up guide, buyers can make sure maximum performance and system longevity.